| Customization: | Available |
|---|---|
| After-sales Service: | After-Sale Service |
| Warranty: | 2 Years or 2000hours |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Genuine CCEC QSK50-C2500 Industrial Diesel Engine | |
| Engine Mode | QSK50-C2500 |
| Manufacturer | CCEC |
| Engine Type | 4-Strok 16-Cylinder V Type |
| Displacement | 50.3L |
| Rate Power/Speed | 1864 Kw @ 1900 Rpm |
| Max Torque | N/A |
| Engine Quality | Genuine Original |
| Engine Condition | 100%New |
| Application | Natural Gas Equipment/Mud Pump/Plunger Pump/Fracturing Truck/Drilling Machine |
| Engine Model: | Rated Power | Aspiration | Curve & Datasheet | Compression Ratio | Fuel System |
| QSK50-C1400 | 1044 kW @ 1800 RPM | Turbocharged & Water-Air Intercooler | FR 6795 | 15.0 : 1 | MCRS |
| QSK50-C1500 | 1119 kW @ 1800 RPM | Turbocharged & Water-Air Intercooler | FR 6790 | 15.0 : 1 | MCRS |
| QSK50-C1600 | 1193 kW @ 1800 RPM | Turbocharged & Water-Air Intercooler | FR 6782 | 15.0 : 1 | MCRS |
| QSK50-C1675 | 1249 kW @ 1800 RPM | 2-Stg Turbocharged and Aftercooled | FR 6794 | 15.0 : 1 | MCRS |
| QSK50-C2500 | 1864 kW @ 1900 RPM | Turbocharged & Water-Air Intercooler | FR 6890 | 15.0 : 1 | MCRS |
| General Infomation of CCEC QSK50-C2500 Industrial Engine | |
| Engine Model | QSK50-C2500 |
| Maxi. Rating | 1864 kW @ 1900 RPM |
| Curve & Datasheet | FR 6890 |
| Compression Ratio | 15.0 : 1 |
| Type | V-16 Cylinder, 4-Stroke, 4-Valve |
| Fuel System | MCRS |
| Aspiration | Turbocharged & Water-Air Intercooler |
| Packing Size(L*W*H) | 2857 mm * 1415 mm * 1766 mm |
| Configuration | D283038CX03 |
| CPL Code Revision | 3728 |
| Governed Power | 1864 kW @ 1900 RPM |
| Emission Standard | U.S. EPA Tier 2 |
| Peak Torque | 9601 N·m @ 1500 RPM |
| Displacement | 50.3 L |
| Bore*Stroke | 159 mm × 159 mm |
| Minimum Low Idle Speed | 600 RPM |
| Maximum Low Idle Speed | 1400 RPM |
| Minimum speed for full load sustained operation | 1700 RPM |
| Engine Sound Pressure Levels3 (Noise) - Top Side | 102.6 dBA |
| Engine Sound Pressure Levels3 (Noise) - Right Side | 101.1 dBA |
| Engine Sound Pressure Levels3 (Noise) - Left Side | 99.7 dBA |
| Engine Sound Pressure Levels3 (Noise) - Right Side | 98.5 dBA |
| Engine Sound Pressure Levels3 (Noise) - Exhaust | 107.1 dBA |
| Maximum overspeed capability | 2250 RPM |
| Mass moment of inertia of rotating components (excluding flywheel) | N/A |
| Engine weight (mining market)Approximate Dry Weight | 13162 lb / 5970 kg |
| Engine weight (locomotive market)-Approximate Dry Weight | 14021 lb / 6360 kg |
| Engine weight (oil and gas market)- Approximate Dry Weight | 13162 lb / 5970 kg |
| Maximum installed engine power angle | 6° |
| Maximum installed engine tilt angle | 6° |
| Engine weight (mining market) Approximate Wet Weight | 14050 lb / 6373 kg |
| Engine weight (locomotive market)-Approximate Wet Weight | N/A |
| Engine weight (oil and gas market)- Approximate Wet Weight | 14050 lb / 6373 kg |
| Moment of Inertia - X-Axis (Roll) | 5346 in-lbf-sec² / 604 kg-m2 |
| Moment of Inertia - Y-Axis (Pitch) | 24711 in-lbf-sec² / 2792 kg-m2 |
| Moment of Inertia - Z-Axis (Yaw) | 23879 in-lbf-sec² / 2698 kg-m2 |
| Center of Gravity - From Rear Face of Block | 40.59 in / 1031 mm |
| Maximum Crankshaft Thrust Bearing Load Limit - Intermittent Load | 2001 lbf / 8900 N |
| Maximum Crankshaft Thrust Bearing Load Limit - Continuous Load | 1000 lbf / 4450 N |
| Maximum Static Bending Moment at Rear Face of Block | 4499 lb-ft / 6100 N.m |
| Maximum Bending Moment Available From Front of Crankshaft - 90 Degrees | 2611 lb-ft / 3540 N.m |
| Maximum Bending Moment Available From Front of Crankshaft - 180 Degrees | 5156 lb-ft / 6991 N.m |
| Maximum Bending Moment Available From Front of Crankshaft - 0 Degrees | 1887 lb-ft / 2559 N.m |
| Maximum Bending Moment Available From Front of Crankshaft - 270 Degrees | 4139 lb-ft / 5612 N.m |
| Center of Gravity - Above Crankshaft Centerline | 7.87 in / 200 mm |
| Optional Accessories of CCEC QSK50-C2500 Industrial Engine | |
| Air Intake System | Air Intake Pre-Heater |
| Air Intake Shut-Off Valve | |
| Air Filter | |
| Air Intake Pre-Filter | |
| Air Filter Alarm System | |
| Exhaust System | Muffler & Bellows |
| Flame Trap | |
| Spark Arrestor Type Muffler & Bellows | |
| Dpf System | |
| Fuel System | Coarse Filter |
| Fuel Pre-Heater | |
| Lubricating System | Oil Pre-Heater |
| Starting System | Manual Magnetic DC Contactor |
| Dual Ears Flywheel Housing | |
| Spring Starter Motor | |
| Air Starter Motor | |
| Hydraulic Starter Motor | |
| Cooling System | Silent Type Radiator |
| Plateau Radiator | |
| Salt-Spray Resistant Radiator | |
| Coolant Pre-Heater | |
| Jacket Water Heater | |
| Engine Auxiliary Accessories | Hydraulic Oil Pump |
| Air Conditioner Compressor | |
| Control System | Option for Engine Monitoring System, Control System With Wiring Harness |
| Option for Self-Protection System that Integrated with Alarm System | |
| Power Output System | Clutch |
| Engine Mounting System | Shock Absorber Pad |
Our main products are Machinery Engine, Mining Engine, Marine Engine, Generator Set and Other Accessories
| -Model NO: ISX15, QSX15, QST60, ISBE, QSB4.5, QSB5.9, QSB6.7, N14 |
| -XCEC: ISM11, OSM11, M11 |
| -CCEC: NT855, KTA19, KTA38, KTA50, QSK19, QSK38, QSK50, QSK60, QSK78,QSNT series |
| -Foton: ISF2.6, ISF3.8, ISG11 |
| -DCEC: 4BT3.9, 6CT8.3, 6L8.9, ISLE, ISDE, ISZ13, L9.3, L9.5 |
All diesel engine assemblies and accessories.
Q1: What are your main products?
A1: Our core products include industrial high-horsepower diesel engines, power units, generator sets, and a variety of engine accessories.
Q2: Which engine models are your best sellers?
A2: Our top-selling engines are the KTA19, KTA38, KTA50, QSK19, QSK38, QSK50, QSK60, QSK78, NT855 and the full range of MTU Series engines.
Q3: What are your payment terms?
A3: We require a 30%-50% deposit via T/T, with the balance due before delivery. We provide photos of the products and packaging before the final payment.
Q4: What is your lead time?
A4: Our standard delivery time is 5-12 business days if the item is in stock.
Q5: What is your warranty policy?
A5: We provide a comprehensive warranty on all our products, including a 2 Years or 2,000hours warranty on new engines.
Q6: Can you provide after-sales support?
A6: Absolutely, we offer technical support, maintenance services to ensure your equipment runs smoothly throughout its lifecycle.
Q7: Do you offer customization options for your engines?
A7: Yes, we can customize engines to meet specific customer requirements, including different power outputs, fuel efficiency, and environmental standards.
Q8: How do you ensure product quality?
A8: We ensure product quality through rigorous testing, quality control, use of genuine parts, and adherence to strict manufacturing standards.
){kind=link}